Standard mode
Recommended for normal driving. Turn the drive mode select switch to the center position.
“STANDARD” appears in the vehicle information display for 2 seconds.
See also:
Uniform tire quality grading
DOT (Department Of Transportation) Quality
Grades: All passenger car tires must
conform to federal safety requirements in
addition to these grades.
Quality grades can be found where applicable ...
Automatic transmission models
Automatic transmission models
To apply: Fully depress the parking brake pedal 1 .
To release:
1. Firmly apply the foot brake 2 .
2. Depress the parking brake pedal 1 and the parking brake will b ...
Clearing the programmed information
Individual buttons cannot be cleared. However, to clear all programming, press and hold the two outside buttons and release when the indicator light begins to flash (approximately 20 seconds). ...