Manual operation

Manual operation - Automatic climate control (Type B) - Automatic climate control - Monitor, climate, audio, phone and voice recognition systems - Infiniti G Owners Manual - Infiniti G

Fan speed control:

Turn the “to manually control the fan speed.” fan speed control dial to manually control the fan speed.

Push the “AUTO” button to return to automatic control of the fan speed.

Air recirculation:

Push the intake air control button “” to recirculate interior air inside the vehicle. The indicator light on the “” side will come on.” to recirculate interior air inside the vehicle. The indicator light on the “The air recirculation mode cannot be activated when the air conditioner is in the front defrosting mode “”.” side will come on.

The air recirculation mode cannot be activated when the air conditioner is in the front defrosting mode “Outside air circulation:”.

Outside air circulation:

Push the intake air control button “” to draw outside air into the passenger compartment. The indicator light on the “” side will come on.” to draw outside air into the passenger compartment. The indicator light on the “Automatic intake air control:” side will come on.

Automatic intake air control:

In the AUTO mode, the intake air will be controlled automatically. To manually con- trol the intake air, push the intake air control button “Air flow control:”. To return to the automatic control mode, push the intake air control button “Air flow control:” for about 2 seconds. The indicator lights (both air recirculation and outside air circulation sides) will flash twice, and then the intake air will be controlled automatically.

Air flow control:

Pushing an air flow control button manually controls the air flow and selects the air outlet to the following settings.

ventilators. : Air flows from center and side ventilators.

ventilators and foot outlets. : Air flows from center and side ventilators and foot outlets.

outlets. : Air flows mainly from foot outlets.

outlets. : Air flows from defroster and foot outlets.

    See also:

    Engine block heater (if so equipped)
    Engine block heaters are used to assist in cold temperature starting. The engine block heater should be used when the outside temperature is 208F (−78C) or lower. To use the engine bloc ...

    Power liftgate main switch
    The power liftgate operation can be turned on or off by the power liftgate main switch on the instrument panel. When the power liftgate main switch is pushed to the OFF position, the power operat ...

    SNOW mode switch (if so equipped)
    SNOW mode switch (if so equipped) For driving or starting the vehicle on snowy roads or slippery areas, turn on the SNOW mode switch. The indicator light 1 on the switch will illuminate. When the ...