Operating range for engine start function

Operating range for engine start function  - Push-button ignition switch - Starting and driving - Infiniti G Owners Manual - Infiniti G

Operating range for engine start function
Operating range for engine start function

The Intelligent Key can only be used for starting the engine when the Intelligent Key is within the specified operating range 1 .

When the Intelligent Key battery is almost discharged or strong radio waves are present near the operating location, the Intelligent Key system’s operating range becomes narrower and may not function properly.

If the Intelligent Key is within the operating range, it is possible for anyone, even someone who does not carry the Intelligent Key, to push the ignition switch to start the engine.

• The trunk area is not included in the operating range but the Intelligent Key may function.

• If the Intelligent Key is placed on the instrument panel, rear parcel shelf, inside the glove box or door pocket, the Intelligent Key may not function.

• If the Intelligent Key is placed near the door or window outside the vehicle, the Intelligent Key may function.

    See also:

    Push-button ignition switch
    WARNING Do not operate the push-button ignition switch while driving the vehicle except in an emergency. (The engine will stop when the ignition switch is pushed 3 consecutive times or the ignition s ...

    Two-Wheel Drive (2WD) models
    Two-wheel drive models INFINITI recommends that your vehicle be towed with the driving (rear) wheels off the ground or place the vehicle on a flat bed truck as illustrated. CAUTION • Never tow au ...

    How to use brightness control and display ON/OFF button
    HOW TO USE BRIGHTNESS CONTROL AND DISPLAY ON/OFF BUTTON Push the button to switch the display brightness to the daytime mode or the nighttime mode, and to adjust the display brightness usin ...