Tire wear and damage

1. Wear indicator
2. Wear indicator location mark
WARNING
• Tires should be periodically inspected for wear, cracking, bulging or objects caught in the tread. If excessive wear, cracks, bulging or deep cuts are found, the tire(s) should be replaced.
• The original tires have built-in tread wear indicators. When wear indicators are visible, the tire(s) should be replaced.
• Tires degrade with age and use.
Have tires, including the spare, over 6 years old checked by a qualified technician, because some tire damage may not be obvious. Replace the tires as necessary to prevent tire failure and possible personal injury.
• Improper service of the spare tire may result in serious personal injury. If it is necessary to repair the spare tire, contact an INFINITI retailer.
• For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet.
See also:
Rain-sensing auto wiper system
The rain-sensing auto wiper system can
automatically turn on the wipers and
adjust the wiper speed depending on the
rainfall and the vehicle speed by using the
rain sensor located on the upp ...
INFINITI Voice Recognition STANDARD mode
The following section is applicable when the Standard Mode is activated.
The Standard Mode enables you to complete the desired operation by simply following the prompts that appear on the display and ...
Power & Handling
My test car was the base FX model, the FX35, which means it has a
303-horsepower, 3.5-liter V-6. The FX50 has a V-8 engine that's, you guessed it,
5.0 liters, producing 390 hp. Costing nearly $14, ...
