Around View™ Monitor (if so equipped)
With the ignition switch in the ON position, press the CAMERA button or move the shift selector to the R (Reverse) position to operate the Around View Monitor. The monitor displays various views of the position of the vehicle.
Available views:
● Bird-Eye View
The surrounding view of the vehicle from above.
● Front-Side View
The view around and ahead of the front passenger’s side wheel.
● Front View
An approximately 150-degree view of the front of the vehicle.
● Front-Wide View
An approximately 180-degree view of the front of the vehicle.
● Rearview
An approximately 150-degree view of the rear of the vehicle.
● Rear-Wide View
An approximately 180-degree view of the rear of the vehicle.
The system is designed as an aid to the driver in situations such as slot parking or parallel parking.
There are some areas where the system will not show objects. When in the front or rearview display, an object below the bumper or on the ground may not be viewed 1 . When in the bird-eye view, a tall object near the seam of the camera viewing areas will not appear in the monitor2.
WARNING
● The Around View Monitor is a convenience feature. It is not a substitute for proper vehicle operation because it has areas where objects cannot be viewed.
Always look out the windows and check to be sure that it is safe to move.
● The driver is always responsible for safety during parking and other maneuvers.
● Do not use the Around View Monitor with the outside mirror in the stored position, and make sure that the liftgate is securely closed when operating the vehicle using the Around View Monitor.
● The distance between objects viewed on the Around View Monitor differs from the actual distance.
● The cameras are installed on the front grille, the outside mirrors and above the rear license plate. Do not put anything on the cameras.
● When washing the vehicle with highpressure water, be sure not to spray it around the cameras. Otherwise, water may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock.
● Do not strike the cameras. They are precision instruments. Doing so could cause a malfunction or cause damage resulting in a fire or an electric shock.
CAUTION
Do not scratch the camera lens when cleaning dirt or snow from the front of the camera.
See also:
Tire pressure
Tire Pressure Monitoring System (TPMS)
This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare. When the low tire pressure ...
How to switch the display
With the ignition switch in the ON position, press the CAMERA button or move the shift selector to the R (Reverse) position to operate the Around View Monitor.
The Around View Monitor can display ...
Audible reminders
Key reminder chime
A chime will sound if the driver side door is opened while the ignition switch is pushed to the ACC position or pushed to the OFF or LOCK position with the Intelligent Key left in ...