Audio main operation
Head unit:
The auto loudness circuit enhances the low and high frequency ranges automatically in both radio reception and CD playback.
ON·OFF/Volume control:
Push the ignition switch to the ACC or ON position, and then push the ON·OFF button while the system is off to turn on the last audio source, which was playing immediately before the system was turned off.
While the system is on, pushing the ON·OFF button turns the system off.
Turn the VOL control knob to adjust the volume.
Adjusting tone quality and speaker balance:
To adjust Bass, Treble, Balance and Fade, push the Audio control knob. When the display shows the setting you want to change (Bass, Treble, Balance and Fade), rotate the Audio control knob to set the desired setting. For the other setting methods, see “How to use SETTING button”.
This vehicle has some sound effect functions as follows:
• Speed Sensitive Vol.
• Precision Phased Audio (if so equipped)
• Driver’s Audio Stage (if so equipped)
For more details, see “How to use SETTING button”.
Switching the display (Type A):
• Models with navigation system Pushing the DISC·AUX button will switch the displays as follows:
iPod®/USB CD/DVD
Music Box®
Bluetooth® Audio
iPod®/USB
• Models without navigation system Pushing the DISC button will switch the display as follows:
CD Music Box®
CD
Pushing the AUX button will switch the display as follows:
USB/iPod XM1
XM2
XM3
USB/iPod
See also:
How to use the SETTING button
When the SETTING button is pressed, the Settings screen will appear on the display. You can select and/or adjust several functions, features and modes that are available for your vehicle. Use the IN ...
FCW system operation
Warning systems switch
The FCW system will function at speeds of approximately 10 MPH (15 km/h) and above, when the system turns on.
The FCW system has an automatic setting mode and a manual sett ...
Entry/exit function
This system is designed so that the driver’s seat and automatic operation steering column will automatically move when the shift selector is in the P (Park) position. This allows the driver to get int ...