Seat belt maintenance

● To clean the seat belt webbing, apply a mild soap solution or any solution recommended for cleaning upholstery or carpet.
Then wipe with a cloth and allow the seat belts to dry in the shade. Do not allow the seat belts to retract until they are completely dry.
● If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dry cloth.
● Periodically check to see that the seat belt and the metal components, such as buckles, tongues, retractors, flexible wires and anchors, work properly. If loose parts, deterioration, cuts or other damage on the webbing is found, the entire seat belt assembly should be replaced.
See also:
Getting the spare tire and tools
Jacking tools — Sedan
Jacking tools — Coupe
Spare — Sedan and Coupe
Raise the trunk floor cover 1 using the tab A .
Remove jacking tools located inside the trunk as illustrated.
The spare t ...
Storage tray
WARNING
Do not place sharp objects in the trays to help prevent injury in an accident or sudden stop. ...
Using system
Initialization:
When the ignition switch is pushed to the ON position, Voice Recognition System is initialized, which may take up to one minute. When completed, the system is ready to accept voice co ...
