Installing top tether strap (3rd row bench seat)
WARNING
In the 3rd row bench seat, a child restraint with a top tether strap can only be used on the passenger side seating position. Do not place in the driver’s side seating position and attempt to angle the tether strap to the passenger side seating position.
The passenger side of the 3rd row bench seat is the seating position that can use a top tether strap.
First, secure the child restraint with the seat belt, as applicable.
1. Position the top tether strap 1 to the outboard side of the head restraint as shown.
2. Secure the tether strap to the tether anchor point 2 on the bottom of the seatback behind the child restraint.
3. Tighten the tether strap according to the manufacturer’s instructions to remove any slack. Make sure the head restraint does not contact the top tether strap.
If you have any questions when installing a top tether strap on the rear seat, consult your INFINITI retailer for details.
See also:
Rear-facing child restraint installation using the
seat belts
WARNING
The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being pro ...
Power steering fluid
Check the fluid level in the reservoir.
The fluid level should be checked when the fluid is cold at fluid temperatures of 32 to 86ºF (0 to 30ºC). The fluid level can be checked with the ...
Programming HomeLink for Canadian customers and gate openers
Canadian radio-frequency laws require transmitter signals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink to pick up the signal during trainin ...