Vehicle security system activation

The vehicle security system will give the following alarm:
● The turn signals blink and the horn sounds intermittently.
● The alarm automatically turns off after a period of time. However, the alarm reactivates if the vehicle is tampered with again. The alarm can be shut off by unlocking the driver’s door or liftgate with the key, or by pressing the
button on the Intelligent Key.
The alarm is activated by:
● opening the door or liftgate without using the key or Intelligent Key (even if the door is unlocked by releasing the door inside lock switch).
See also:
Replacing
Replace the wiper blades if they are worn.
1. Pull the wiper arm.
2. Push the release tab A , and then
move the wiper blade down the wiper
arm 1 while pushing the release tab
to remove.
...
Engine compartment
CAUTION
Never use a fuse of a higher or lower
amperage rating than that specified on the
fuse box cover. This could damage the
electrical system or cause a fire.
If any electrical equipme ...
Programming HomeLink® for Canadian customers
Prior to 1992, D.O.C. regulations required
hand-held transmitters to stop transmitting
after 2 seconds. To program your handheld
transmitter to HomeLink®, continue to
push and hold the HomeLin ...
