Around ViewTM Monitor

Around ViewTM Monitor  - Monitor, climate, audio, phone and voice recognition systems - Infiniti QX Owners Manual - Infiniti QX

When you push the CAMERA button or shift the selector lever into the R (Reverse) position while the ignition switch is in the ON position, the Around View Monitor operates. The monitor displays various views of the position of the vehicle. Available views:
► Bird-Eye View
The surrounding view of the vehicle.
► Front-Side View
The view around and ahead of the front passenger’s side wheel.
► Front View
The view to the front of the vehicle.
► Rearview
The view to the rear of the vehicle.
► Rear-Wide View
An approximately 180-degree view of the rear of the vehicle. The system is designed as an aid to the driver in situations such as slot parking or parallel parking.

There are some areas where the system

There are some areas where the system will not detect objects. When in the front or the rearview display, an object below the bumper or on the ground may not be detected 1 . When in the bird-eye view, a tall object near the seam of the camera detecting areas will not appear in the monitor 2 .

► The Around View Monitor is a convenience WARNING

► The Around View Monitor is a convenience but it is not a substitute for proper vehicle operation because it has areas where objects cannot be viewed. Always look out the windows and check mirrors to be sure that it is safe to move before operating the vehicle. Always operate the vehicle slowly.
► Do not use the Around View Monitor with the outside mirror in the stored position, and make sure that the lift gate is securely closed when operating the vehicle using the Around View Monitor.
► The distance between objects viewed on the Around View Monitor differs from the actual distance.
► The cameras are installed above the front grille, the outside mirrors and above the rear license plate. Do not put anything on the cameras.
► When washing the vehicle with highpressure water, be sure not to spray it around the cameras. Otherwise, water may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock.
► Do not strike the cameras. They are precision instruments. Doing so could cause a malfunction or cause damage resulting in a fire or an electric shock.

CAUTION
Do not scratch the lens when cleaning dirt or snow from the front of the camera.

NOTE:

The color of the view on the Around View Monitor display is different from the actual view because the system uses infrared cameras.

Shift the selector lever

Select the “Wide”, “Side” or Shift the selector lever
“Top” key on the Select the “Wide”, “Side” or “Top” key on the screen.
A : Original screen before the Around Push the CAMERA button

A : Original screen before the Around View Monitor is operated
B : Rear view/bird-eye view screen
C : Rear view/front-side view screen
D : Rear-wide view screen
E : Front view/bird-eye view screen
F : Front view/front-side view screen

See also:

Selecting the vehicle-to-vehicle distance control mode
To choose the vehicle-to-vehicle distance control mode 1 , quickly push and release the CRUISE ON/OFF switch A . ...

To turn the system off
Push the OFF button. ...

Standard mode
Recommended for normal driving. Turn the drive mode select switch to the center position. “STANDARD” appears in the vehicle information display for 2 seconds. ...