Power steering fluid
Check the fluid level in the reservoir. The fluid level should be checked using the HOT range (1 : HOT MAX., 2 : HOT MIN.). at fluid temperatures of 122 to 1768F (50 to 808C) or using the COLD range (3 : COLD MAX., 4 : COLD MIN.) at fluid temperatures of 32 to 868F (0 to 308C). If the fluid is below the MIN line, add Genuine NISSAN PSF or equivalent. Remove the cap and fill through the opening.
CAUTION
► Do not overfill.
► Use Genuine NISSAN PSF or equivalent.
See also:
Reprogramming a single HomeLink® button
To reprogram a HomeLink® Universal
Transceiver button, complete the following.
1. Push and hold the desired HomeLink®
button. Do not release the button until
step 4 has been completed.
2. Wh ...
Meter/ring illumination and needle sweep
The ring illumination surrounding meters
and gauges illuminates when the driver’s
door is closed after getting into the vehicle
with the Intelligent Key carried in.
When the engine is started, ...
Engine protection mode
The engine has an engine protection mode
to reduce the chance of damage if the
coolant temperature becomes too high (for
example, when climbing steep grades in
high temperature with heavy load ...