Meters and gauges
1. Tachometer
2. Warning/Indicator lights
3. Speedometer
4. Engine coolant temperature gauge
5. Voltmeter
6. Dot matrix liquid crystal display/
Odometer/twin trip odometer
7. Engine oil pressure gauge
8. Fuel gauge
: The needle indicators may move slightly
after the ignition switch is pushed to the
OFF position. This is not a malfunction.
See also:
BSW system operation
If the radar sensors detect vehicles in the detection zone, the Blind spot warning indicator light located inside the outside mirrors illuminates. If the turn signal is then activated, the system ch ...
Checking engine oil level
Checking engine oil level
1. Park the vehicle on a level surface and apply the parking brake.
2. Run the engine until it reaches operating temperature.
3. Turn off the engine. Wait more than 15 m ...
Vehicle-to-vehicle distance control mode
In the vehicle-to-vehicle distance control mode, the Intelligent Cruise Control (ICC) system automatically maintains a selected distance from the vehicle traveling in front of you according to that ve ...